[Misc] Disable the 3 sheet auto calibration on KM C6000

[Guest]

I'm using a KM C6000 and I need to find the setting where I can disable the function that outputs the 3 calibrations sheets in the beginning of a job.
I'm trying to print black on some gold foil paper, but the calibration that it does keeps stopping the machine, since it can't read the calibration on the blank gold paper.

I simply cannot find the function to disable it while I'm trying to complete this job.

[Synthohol]

Re: Disable the 3 sheet auto calibration on KM C6000

what 3 calibration pages? never heard of this.
can you scan them and post?

[madsk]

Re: Disable the 3 sheet auto calibration on KM C6000

what 3 calibration pages? never heard of this.
can you scan them and post?

Yes I've scanned and attached it below.

[Synthohol]

Re: Disable the 3 sheet auto calibration on KM C6000

What controller is on it?

[madsk]

Re: Disable the 3 sheet auto calibration on KM C6000

What controller is on it?

Not really sure - I'm not used to Konica machines - how do I check this?

[Synthohol]

Re: Disable the 3 sheet auto calibration on KM C6000

On any computer that prints to it you can look at the printer properties under advanced and tell me what driver is listed or touch controller on the screen and print a config page.

[mx6turbo89]

Re: Disable the 3 sheet auto calibration on KM C6000

Turn off Color Density Control in the C6000.

[andyf424]

Re: Disable the 3 sheet auto calibration on KM C6000

It's part of the ru-509 color density sensor. i forgot how to shut that off. I'll look in to it later but check the manual for ru-509 color density and you should find it.