Konica Minolta c451 Fiery IC-409 X3eTY2-14

[jamiecruickshank]

Hi folks,

Thanks for reading my post.
I have purchased a Konica Minolta c451 printer with a Fiery unit installed.
I have been unable to get the unit to work so i have removed it from the printer to test.
The unit will power on and i have done a full hardware test which passes.
However when it goes to boot linux i get "Uncompressing linux... Ok, booting the kernel".

I presume i will need to reinstall the software however don't have any access (or know anyone) that has access to mykonicaminolta to give me the ISO files.

Is there anyone who would be kindly enough to send me links to the software.

Thank you very much.
Jamie

[Synthohol]

Re: Konica Minolta c451 Fiery IC-409 X3eTY2-14

check your PMs