Trouble code 9401....replaced CCD..code gone,but 3/4 copy black.Any I can do...firmware updated
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
-
-
Re: Biz hub 654
Have a look.
Better to search the site this way.
Whatever -
Re: Biz hub 654
I'm thinking that you turned the wrong screws when installing the CCD. The painted screws are to focus the CCD, and most likely you changed that focus. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Biz hub 654
We have had some faulty out of the box CCD's lately.
Last one had about 1/2 inch skew off the glass on install, the original faulty was put back in and perfect but S-1. (probably dropped in transit)
replaced with another new one, no more problems.Comment
-
Re: Biz hub 654
http://www.copytechnet.com/forums/ko...423-focus.html
Does it look like this?:
bizhub 423 scanner focus.jpg
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment