Re: Sudden vibration in Biz Hub C452
Get Philips #2. Lift the ADF. On very top left hand as you can now see the under side roller there is 2 screws for that ADF cover(front handle) just unscrew it and the cover comes off. Now have a look if there isn't something that could cause the sensor to be blocked. (Dust, circles from pre punch paper, staples, paper clips)
To get the ADF running perform trouble reset. Procedure is on forum. Good luck and have a nice weekend.
Sent from my iDon't believe in marketing device using Tapatalk
Get Philips #2. Lift the ADF. On very top left hand as you can now see the under side roller there is 2 screws for that ADF cover(front handle) just unscrew it and the cover comes off. Now have a look if there isn't something that could cause the sensor to be blocked. (Dust, circles from pre punch paper, staples, paper clips)
To get the ADF running perform trouble reset. Procedure is on forum. Good luck and have a nice weekend.
Sent from my iDon't believe in marketing device using Tapatalk
Comment