bizhub 454e mated to ancient coinop

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22932
    #1

    bizhub 454e mated to ancient coinop

    The problem isn't getting the coinop to communicate. I've figured that part out. There are two Billing Setting modes that seem to work: Key Counter/IF Vendor and Vendor 2. There are a couple little annoyances though.

    If I select Vendor 2, when the enduser deposits coins the machine pops up with a login screen, requiring the 16 digit Admin password. This isn't terribly convenient for the endusers, who have a hard enough time finding the Start key (Enduser: Why is it blue? The old Toshiba had a green one. Me: ***shrug***).

    If I select Key Counter/IF Vendor, when the enduser deposits coins it comes straight to ready, but Auto Paper Selection is disabled. The button is gone. The machine identifies if the original orientation doesn't match, but still copies onto the wrong paper. It defaults to whatever is in tray #1. The enduser can select a different paper tray, but we're back to the enduser having to use their brain. It probably isn't going to happen.

    Question #1: Can I make the password screen disappear?
    or Question 2): Can I get APS back?

    Either one is fine.

    Extensive manual searching hasn't turned up much. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22932
      #2
      Re: bizhub 454e mated to ancient coinop

      I'm not sure where it originated, but arrived through the service manager:

      DIPSW 32, bit 4 to "1"
      i.e.:
      default is disabled with Key Counter/IF Vendor ON= 0x00
      ACSD/APS/ATS enabled= 0x10

      I'll be trying it out Friday. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...