cc181

[spokc]

poor quality was reported black dev looked bad shook it back and forth a bit and reinserted it prints looked ok after but got cc181 error wont reset
power was shut off before dev unit was removed
any ideas

[spokc]

Re: cc181

it is a bizhub c280

[Synthohol]

Re: cc181

[ncbabak]

Re: cc181

Hi
You must update firmware

[spokc]

Re: cc181

Hi
You must update firmware

thanks that iswhat i thought to thanks

[spokc]

Re: cc181

thanks that iswhat i thought to thanks

firmware fixed it thanks

[francura95]

Re: cc181

[Quote = Synthohol; 546008][/QUOTE]

Could anyone tell me how to do it? is there a guide? I use the office printer and I can't solve it.
I tried to look for the firmware on the internet but I can't find it.

[Bix]

Re: cc181

Could anyone tell me how to do it? is there a guide? I use the office printer and I can't solve it.
I tried to look for the firmware on the internet but I can't find it.

Hi, a technician is needed.
Look for a Konica Minolta partner in your area

[francura95]

Re: cc181

Hi, a technician is needed.
Look for a Konica Minolta partner in your area

I tried to contact the technician but they are not in my area.


I'd like to do it alone. Do you know where I can get firmware and guide?


Thank you