J72-19 FS-534 Konica Bizhub 654

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dragonman
    Technician
    • Aug 2010
    • 24
    #1

    [Jamming] J72-19 FS-534 Konica Bizhub 654

    Hi All,

    Loosing the will to live with this fault, im getting an intermittent fault code of J72-19 on the smaller FS-534 finisher that only appears to happen after a long run of copies. the firmware is bang up to date and sensors changed (PS5 and PS4). it looks like its jamming at the entrance to the horizontal transport section straight after the exit from the turnaround unit. Anyone have any ideas or had something similar? ive checked all previous threads and nothing has worked so far.

    Many thanks in advance.
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23009
      #2
      Re: J72-19 FS-534 Konica Bizhub 654

      Google works quite nicely to find this sort of information:

      http://www.copytechnet.com/forums/ko...e-wearing.html
      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...