C452 does not sense sometimes Finisher

[apus824]

Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!

[MFPTech]

Re: C452 does not sense sometimes Finisher

Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!

Firmware update?

Sent from my SGH-I337M using Tapatalk

[mx6turbo89]

Re: C452 does not sense sometimes Finisher

Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!

That can be a symptom of the DC Power Supply overheating. Try cleaning the often-overlooked DCPS cooling fan filter on the rear left side towards the bottom, then see if the problem returns. If so, replace the DCPS.

[apus824]

Re: C452 does not sense sometimes Finisher

Thank You!
I will try thats!

[Woxner]

Re: C452 does not sense sometimes Finisher

there is a board on the transport that goes bad

[apus824]

Re: C452 does not sense sometimes Finisher

there is a board on the transport that goes bad

Hi!Ihavebeenchanged the DCPS and the mashine works good,two weeks ago!
Thank you for your help!