Printing from within service mode or test print mode

[plnewton]

Hi All

I have a c6000 machine that is throwing up C-4501 through to C-4503 on startup and auto color reg, the machine is producing more than adequate prints in test print mode for the current job that needs to be run

It is looking like a Printer Control Board change but that is going to take a few days to get in, is there a way to get a print job through Fiery when it is in print test mode or is there any way it can limp through this final job until the parts get here?

regards,
Paul

[Synthohol]

Re: Printing from within service mode or test print mode

there is a bitswitch to turn off auto color registration.
maybe that would help?

[plnewton]

Re: Printing from within service mode or test print mode

yes, good thinking that would get me by I think, I will see if I can find it

[plnewton]

Re: Printing from within service mode or test print mode

That did the trick, thanks for that
I was concentrating so hard on trying to send a print job in test mode that I didnt even think of looking for that option, cheers

[Synthohol]

Re: Printing from within service mode or test print mode

thats why we are here
glad i could help.