YSOFT usbrdrtool

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DanielOlsson

    #16
    Re: YSOFT usbrdrtool

    So I'm still looking. Been around the entire internet and still haven't found the tool. Also contacted ysoft a couple of days ago but no reply yet. Of anyone still got this tool please help me out. I've ordered a replacement unit for the printer, maybe the software is included when it arrives so that I can salvage the old unit

    Comment

    • 3dms
      Technician
      • Sep 2017
      • 15

      #17
      Re: YSOFT usbrdrtool

      I have a ysoft reader tool and load driver, if necessary, can write e-mail shixiliang@eircc.com

      Comment

      • tonyligz
        Technician
        • Jun 2008
        • 26

        #18
        Re: YSOFT usbrdrtool

        I need (KM) usb reader change usb reader(for xerox) tool,please sent to mail 405173825@qq.com ,thank you!

        Comment

        • ivus
          Junior Member
          • Apr 2018
          • 6

          #19
          Re: YSOFT usbrdrtool

          i would also like a copy of this tool please.

          Comment

          • Synthohol
            Certified Konica Expert

            Site Contributor
            5,000+ Posts
            • Mar 2016
            • 5841

            #20
            Re: YSOFT usbrdrtool

            i think pcprox does the same and more.
            Downloads | RF IDeas
            We know a thing or two because we've seen a thing or two.
            The medication helps though...

            Comment

            • ivus
              Junior Member
              • Apr 2018
              • 6

              #21
              Re: YSOFT usbrdrtool

              just downloaded that tool and while it attempts to connect the card reader beeps but doesn't connect to be able to make changes to the config.
              Originally posted by Synthohol
              i think pcprox does the same and more.
              Downloads | RF IDeas

              Comment

              • Synthohol
                Certified Konica Expert

                Site Contributor
                5,000+ Posts
                • Mar 2016
                • 5841

                #22
                Re: YSOFT usbrdrtool

                you might have to change a "bit" in the reader config to match the mfg?
                dunno which, i had to do it once a while back.
                We know a thing or two because we've seen a thing or two.
                The medication helps though...

                Comment

                • ivus
                  Junior Member
                  • Apr 2018
                  • 6

                  #23
                  Re: YSOFT usbrdrtool

                  doesn't seem that easy, no options in the pcproxconfig.exe to change to select a broader scope of devices.

                  if anyone has the old usbrdrtool.exe it seems like it would be the simplest but hasn't been easy to find on google, this forum was the closest i could find so far.

                  Comment

                  • avecosat
                    Trusted Tech

                    250+ Posts
                    • Jun 2012
                    • 305

                    #24
                    Re: YSOFT usbrdrtool

                    please send Pm usbrdtool,

                    Thanks

                    Comment

                    • s3n5e
                      Junior Member
                      • Jul 2015
                      • 1

                      #25
                      Re: YSOFT usbrdrtool

                      Hi. Can someone send me usbrdrtool? Thanks.

                      Comment

                      • azman_uk

                        #26
                        Re: YSOFT usbrdrtool

                        Hi All,

                        Also looking for the usbrdtool if anyone can help please.

                        Thanks in advance

                        Comment

                        • arahael
                          Technician

                          Site Contributor
                          50+ Posts
                          • Mar 2013
                          • 97

                          #27
                          Re: YSOFT usbrdrtool

                          Hi can You help me with this tool.
                          jstus@o2.pl

                          Comment

                          • sangcom
                            Technician
                            • Jun 2009
                            • 45

                            #28
                            Re: YSOFT usbrdrtool

                            Hi all,
                            If it's AU205H
                            You can manage via web browser (default IP http://192.168.63.99) you must be install driver on PC before use manage via web browser.
                            You can download driver this link

                            If it's Ysoft Card Reader you must be use ConfigYSoft CardReaders tool.

                            Lucky

                            Comment

                            • 3dms
                              Technician
                              • Sep 2017
                              • 15

                              #29
                              Re: YSOFT usbrdrtool

                              [QUOTE = arahael; 698002]你能帮助我使用这个工具吗?
                              jstus@o2.pl [/ QUOTE]

                              tools send to your email! chk!

                              Comment

                              • 3dms
                                Technician
                                • Sep 2017
                                • 15

                                #30
                                Re: YSOFT usbrdrtool

                                [QUOTE = azman_uk; 695347]

                                大家好,如果有人可以提供帮助请同时寻找usbrdtool。

                                提前致谢[/ QUOTE]

                                i can help you send mail to me shixiliang@eircc.com

                                Comment

                                Working...