I thought this was going to be a flimsy machine and I was right.. we got 150k out of it.. and I went to replace the belt and put it all back together and it rhasps
now just vibrates.. ended up bringing it to the shop and it still did it.. when I take the transfer roller out the noise goes away but of course it wont work
to make a quick fix I shoved some paper above the transfer belt to give it downword pressure and it works fine now.. but I cant take it back like this
any thoughts on this? did I bent something In the rear side while taking out the belt? it looks ok. any help?
thanks all
brent
now just vibrates.. ended up bringing it to the shop and it still did it.. when I take the transfer roller out the noise goes away but of course it wont work
to make a quick fix I shoved some paper above the transfer belt to give it downword pressure and it works fine now.. but I cant take it back like this
any thoughts on this? did I bent something In the rear side while taking out the belt? it looks ok. any help?
thanks all
brent
Comment