Konica C220 ADF jam 66-01

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jonbonse
    Senior Tech

    Site Contributor
    500+ Posts
    • Jun 2009
    • 737

    #1

    Konica C220 ADF jam 66-01

    Hi all

    I have a machine jamming with jam code 66-01 in the ADF (DF-617).

    It is multi-feeding intermittently....

    I have replaced ADF rollers, tried the separation housing spring in all three locations, replaced the separation roller torque limiter, blew out the sensors & pads and even added a couple of screws to the lift plate to increase the pressure at pickup....

    Any ideas to get round this without smashing it up?
  • Copier Addict
    Aging Tech

    Site Contributor
    10,000+ Posts
    • Jul 2013
    • 14666

    #2
    Re: Konica C220 ADF jam 66-01

    Originally posted by jonbonse
    Hi all

    I have a machine jamming with jam code 66-01 in the ADF (DF-617).

    It is multi-feeding intermittently....

    I have replaced ADF rollers, tried the separation housing spring in all three locations, replaced the separation roller torque limiter, blew out the sensors & pads and even added a couple of screws to the lift plate to increase the pressure at pickup....

    Any ideas to get round this without smashing it up?
    Trim the mylar on the pre-separation pad back a couple millimeters and put the tension spring in the bottom slot,(least amount of pressure). that has always solved the multi-feeding problem for me.

    Comment

    Working...