Bizhub C220 is making strange noise + Video

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • christmu
    Junior Member
    • Sep 2017
    • 3

    #16
    Re: Bizhub C220 is making strange noise + Video

    Hi,
    its been a long time ago that I cleaned that transfer belt, but i don't remember that ist has been hard.

    YouTube
    This video (not mine) shows you how to remove the transfer belt, afterwards you will see where the powder stucks. Just clean it without harming the belt.
    You will also see a small channel where the powder ist thought to move into the waste toner box. You should also clean this one. When finished just replace the transfer belt and the noise will be gone.

    Greetings.

    By the way I have another Issue with my C220. I do often have problems with paper jamming. It usually jams 3 piece of paper in different positions. Is this a common problem? Is there a single cause for paper jamming like that?

    Comment

    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7916

      #17
      Re: Bizhub C220 is making strange noise + Video

      christmu, post separate thread and paper jam code.
      Mixing different questions in one thread is annoying as it obscures finding proper solutions for future readers!
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      • TLUK
        Junior Member
        • Oct 2019
        • 1

        #18
        Re: Bizhub C220 is making strange noise + Video

        You will need to clean the down pipe that feeds from cleaning unit into waste box that usually gets clogged up which then causes the cleaning unit to block.

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 7916

          #19
          Re: Bizhub C220 is making strange noise + Video

          Originally posted by TLUK
          You will need to clean the down pipe that feeds from cleaning unit into waste box that usually gets clogged up which then causes the cleaning unit to block.
          Good info but that was already mentioned
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

          Comment

          • Gael
            Technician
            • Oct 2019
            • 18

            #20
            Re: Bizhub C220 is making strange noise + Video

            Thank you very much, i try to do this and i make a feedback

            Comment

            • Gael
              Technician
              • Oct 2019
              • 18

              #21
              Re: Bizhub C220 is making strange noise + Video

              Thanks again !
              I cleaned the transfer belt as explained by christmu and now no noise and no need to buy a new photocopier.

              Comment

              • Mister C
                Junior Member
                • Nov 2020
                • 6

                #22
                Re: Bizhub C220 is making strange noise + Video

                Originally posted by EarthKmTech
                Know that noise anywhere.

                transfer belt cleaning section is blocked.

                clean it out and unblock the chute to the waste toner bottle.

                15 minute job.

                problem solved.

                For what's it worth, I just had the same issue on a Bizhub C3320i which has under 10k pages. In my case there were chunks of hardened toner in the shutter which prevented it to open correctly. The yellow imaging unit under the shutter was full of spilled waste toner.
                In my case it made noise only when printing something. During startup and "idle" operation the machine was silent.

                Comment

                Working...