Re: Network tab missing after disable DHCP on Bizhub C353
Now I realize this is an OLD machine but I have the same issue. I have tried the network reset with the NVRAM firmware but I keep getting an error on the firmware update screen. It reads as follows:
Error.
This is an invalid card.
Please make sure the card.
That is all it says. I have tried the following size cards: 32MB, 128MB, 1GB and 32GB. Also tried both fat and fat32 formats with the same results. I understand this machine is discontinued and no longer supported by Konica. Any ideas would be appreciated. Thanks!
Well, I see that the FW must be written to the CF card using the firmware imaging tool and not directly. It seems to be working now. I will try it on the customers machine after trying it on mine.
Now I realize this is an OLD machine but I have the same issue. I have tried the network reset with the NVRAM firmware but I keep getting an error on the firmware update screen. It reads as follows:
Error.
This is an invalid card.
Please make sure the card.
That is all it says. I have tried the following size cards: 32MB, 128MB, 1GB and 32GB. Also tried both fat and fat32 formats with the same results. I understand this machine is discontinued and no longer supported by Konica. Any ideas would be appreciated. Thanks!
Well, I see that the FW must be written to the CF card using the firmware imaging tool and not directly. It seems to be working now. I will try it on the customers machine after trying it on mine.
Comment