Biz C253 quality - color registration

[copyman]

Intermittent ghost image on pages. Printing & copying. See attached pics. The 2 times I was there next mornings and it didn't do it for me.

Transfer belt replaced in Sept as well as IU's M & Y in Aug.

Even though quality was good next day when I showed up I went ahead did all the usual things, cleaned print heads, pulled blue cleaners in and out to clean charge plates, IDC/registration sensor, graduation adj, etc
Any ideas appreciated?

Thanks in advance

[kenpio]

Re: Biz C253 quality - color registration

The one time that I had this there was a nick or or scratch on the transfer belt, right in line with the IDC sensors. I had the 3D look, it was on this model too. I would look at the transfer belt.

KEN

[RUSORIZO]

Re: Biz C253 quality - color registration

Intermittent ghost image on pages. Printing & copying. See attached pics. The 2 times I was there next mornings and it didn't do it for me.

Transfer belt replaced in Sept as well as IU's M & Y in Aug.

Even though quality was good next day when I showed up I went ahead did all the usual things, cleaned print heads, pulled blue cleaners in and out to clean charge plates, IDC/registration sensor, graduation adj, etc
Any ideas appreciated?

Thanks in advance

Hi copyman,

Are you able to fix the problem? I am having the same problem with our KM Bizhub. Thanks

[copyman]

Re: Biz C253 quality - color registration

Hi copyman,

Are you able to fix the problem? I am having the same problem with our KM Bizhub. Thanks

Ha-ha, Had to go back to 2017 records to see what I did.
In this case it was the magenta image unit. The one I put in a few months before was rebuilt and didn't last! Back to OEM only with this older model.