Black streaks on copies / printout - bizhub c552

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AhmedChamumi
    Trusted Tech

    Site Contributor
    100+ Posts
    • May 2016
    • 130

    #1

    Black streaks on copies / printout - bizhub c552

    Helo everyone,

    Attached are the samples from bizhub c552 which was recently replaced with MFPB , hand drawn arrows indicate paper feed direction, so far i have tried PH relay board, flat cables and firmware rewriting with no visible improvement...am i faced with another MFPB replacement?

    Best of regards,

    Ahmed R. Chamumi.
    Attached Files
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22927

    #2
    Re: Black streaks on copies / printout - bizhub c552

    Is that a mirror image? Is that function turned on? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • AhmedChamumi
      Trusted Tech

      Site Contributor
      100+ Posts
      • May 2016
      • 130

      #3
      Re: Black streaks on copies / printout - bizhub c552

      Originally posted by blackcat4866
      Is that a mirror image? Is that function turned on? =^..^=
      By mirror image do you mean the copied image? if so this happen to both printing and copies as well, i haven't quite understood when you asked if the function is turned on...what function please/

      Best of regards,

      Ahmed R. Chamumi.

      Comment

      • AhmedChamumi
        Trusted Tech

        Site Contributor
        100+ Posts
        • May 2016
        • 130

        #4
        Re: Black streaks on copies / printout - bizhub c552

        Originally posted by AhmedChamumi
        By mirror image do you mean the copied image? if so this happen to both printing and copies as well, i haven't quite understood when you asked if the function is turned on...what function please/

        Best of regards,

        Ahmed R. Chamumi.

        Mirror image is not turned on.

        Comment

        • Zesti
          Trusted Tech

          250+ Posts
          • Jun 2009
          • 308

          #5
          Re: Black streaks on copies / printout - bizhub c552

          Originally posted by AhmedChamumi
          Mirror image is not turned on.
          Ur MFPB is bad.

          Sent from my RHYTHM RX60 using Tapatalk

          Comment

          Working...