Konica Minolta C654e Scanning Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • musthafavi
    Technician

    50+ Posts
    • Aug 2017
    • 76

    #1

    [Misc] Konica Minolta C654e Scanning Issue

    Konica Minolta C654e Scanning Issue from feeder, at a time, taking multiple pages while scanning bulk copies from ADF
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4535

    #2
    Re: Konica Minolta C654e Scanning Issue

    ADF separation roller needs to be replaced.

    By the way you have opened several posts with questions that you could find answers for in the service manual. If you don't have manual why not just request here and it would be much easier for you.

    Comment

    • musthafavi
      Technician

      50+ Posts
      • Aug 2017
      • 76

      #3
      Re: Konica Minolta C654e Scanning Issue

      Originally posted by copyman
      ADF separation roller needs to be replaced.

      By the way you have opened several posts with questions that you could find answers for in the service manual. If you don't have manual why not just request here and it would be much easier for you.
      Thanks for your reply and issue has been resolved


      I don't have service manual if you have could you please post it here
      Last edited by musthafavi; 12-12-2017, 08:11 AM.

      Comment

      • Zesti
        Trusted Tech

        250+ Posts
        • Jun 2009
        • 308

        #4
        Re: Konica Minolta C654e Scanning Issue

        Originally posted by musthafavi
        Thanks for your reply and issue has been resolved


        I don't have service manual if you have could you please post it here
        So would you like to share what went wrong...

        Comment

        • musthafavi
          Technician

          50+ Posts
          • Aug 2017
          • 76

          #5
          Re: Konica Minolta C654e Scanning Issue

          Originally posted by Zesti
          So would you like to share what went wrong...
          as the above thread "Separation roller" has been changed and its working fine

          Comment

          Working...