Error Code C-3452 on KM- C450

[cpress]

I just replaced the fuser unit and this code came up . How to i fix this code
TIA
David

[RockETop]

Search is your friend.....

http://www.copytechnet.com/forums/konica-minolta/10478-bizhub-c351-error-c-3452-a.html?

http://www.copytechnet.com/forums/konica-minolta/5487-minolta-bizhub-c450.html

[copy shop]

List of Malfunction Resetting Procedures

Different malfunction resetting procedures apply depending on the rank of the trouble code.
* List of Malfunction Resetting Procedures

Trouble Code Rank Resetting Procedures

For details of Trouble Reset, see Adjustment/Setting below
------------------------------------------------------

Setting / Procedure

1.

Turn OFF the Main Power Switch.

2.

Turn Main Power Switch ON again while hoding down the Utility/Counter key more than 10 seconds after.

3.

Touch [Trouble Reset].

4.

Check to make sure that [OK] is displayed below and then it has been reset.
If ok is not there , it will show a different code....
IF it says OK, you should be good to go.

5. Just

Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly starts.

Hope this helps
Tammy