Bizhub 920

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22946
    #16
    Re: Bizhub 920

    Since you don't say so, I'm going to guess that you did not add any developer. And what we're seeing is the little bit of toner that the machine is desperately trying to add.

    Do yourself a favor. Hire a professional. It will save you a lot of money. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • Figu
        Technician
        • May 2017
        • 14
        #17
        Re: Bizhub 920

        Originally posted by blackcat4866
        Since you don't say so, I'm going to guess that you did not add any developer. And what we're seeing is the little bit of toner that the machine is desperately trying to add.

        Do yourself a favor. Hire a professional. It will save you a lot of money. =^..^=
        The counters are mostlikely reset.
        I have not added anything yet, just ordered a developer. Ihave new toner cartridges but I think it will be better to wait for thedeveloper to arrive and replace them after a good clean.
        I would hire a professional, but in the remote are that Ilive there are none. I have no problem replacing, disassembling and puttingback together the unit, but always appreciate help and tips from experiencedones.

        You mentioned about several service mode that needs to be initiated, could you tell me which one please?

          Comment

          • methogod
            Senior Tech

            Site Contributor
            500+ Posts
            • Dec 2008
            • 915
            #18
            Re: Bizhub 920

            can you get into service mode the normal way? stop 0 stop 01?

            i would obtain the service manual first and foremost....

              Comment

              • Figu
                Technician
                • May 2017
                • 14
                #19
                Re: Bizhub 920

                Originally posted by methogod
                can you get into service mode the normal way? stop 0 stop 01?

                i would obtain the service manual first and foremost....
                Yes, service mode is accessable via stop 00 stop 01.

                I have the manual, so far all the work done by me is using that manual.

                  Comment

                  Previous 1 2 template Next
                  Working...