The Fusing Belt sticks and wraps sheets of low-weight paper.
Hello, I would like to thank the entire CopyTech team and its members here, I have learned a lot from you.
Here's another riddle.
The Fusing Belt is fastening and curling the sheets at the time of the merger.
See attached photos.
Fusign Belt Sheet.jpgFusign Belt 02.jpgFusign Belt 01.jpgFusign Belt 03.jpg
Status
- Fuser Roller Lower [new]
- Fuser Up Rollers 1 and 2 are still in good condition.
- A1DUR74H00 - Fusing Separation Plate Assy [new]
- A03U736100 - Fusign Belt [new]
The problem occurs with fine paper, 90 / 115g, on prints with high toner charge / density.
Impressions with low or blank charge the problem does not occur.
The machine always printed normally under these conditions, the problem is recent.
Thanks for listening. I look forward to your opinions.
Hello, I would like to thank the entire CopyTech team and its members here, I have learned a lot from you.
Here's another riddle.
The Fusing Belt is fastening and curling the sheets at the time of the merger.
See attached photos.
Fusign Belt Sheet.jpgFusign Belt 02.jpgFusign Belt 01.jpgFusign Belt 03.jpg
Status
- Fuser Roller Lower [new]
- Fuser Up Rollers 1 and 2 are still in good condition.
- A1DUR74H00 - Fusing Separation Plate Assy [new]
- A03U736100 - Fusign Belt [new]
The problem occurs with fine paper, 90 / 115g, on prints with high toner charge / density.
Impressions with low or blank charge the problem does not occur.
The machine always printed normally under these conditions, the problem is recent.
Thanks for listening. I look forward to your opinions.