Re: what is your GO-TO usb ?
Use the proper software Eject button before removing the USB-stick from the computer USB slot.
Otherwise if you rip it out you risk getting a corrupt USB stick. Its not a matter of if it will corrupt, but when it will corrupt.
You obviously haven't lost a lot of good e-manuals or file data on a USB stick by ripping the USB-stick out of the slot.
Try putting 32GB of e-manuals back onto a USB stick every time you've been in such a hurry on a job site.
You'll soon learn to slow down a tad an eject the USB stick the proper way, like I do now. I have Terrabyte HDD USB drives now. Takes around 5 hours to reload the data back onto 1TB HDD.
-
Re: what is your GO-TO usb ?
We have Chinese el cheapo 4gb USB that works for everything but firmware. I cant find a reason why though it's just like some do some dont
Luckily they are so cheap these days
I'm currently using verbatim 8gb with no probLeave a comment:
-
Re: what is your GO-TO usb ?
got a microcenter near you? their 4g drives work for years and have been through my laundry several times and still work 100%
forgive the dumb question, where are you plugging the drives into the copier to do FW?Leave a comment:
-
what is your GO-TO usb ?
In house, before machines hit the field.
We have a sandisk 2 gb 2.0 usb drive and we've never had a problem with it always worked for both firmware animation voice etc.
Now I have 3 mono bizhubs (364E) that all wont accept my drive. Any ideas?
Figured I'd buy a fresh drive but wanted input if there was a certain brand that works best?
Leave a comment: