bizhub 308e sometimes bad prints

[Bix]

Hello,


I have a problem with a new bizhub 308e. As soon as I turn on the printer, the copies have a stain at the bottom of the blurred sheet. After two prints, the copy continues to be beautiful.


I tried to turn it off and on again. It refers to the same problem.

scanner.jpg
Sorry for the black censorship, this is because there is personal information from the client.
However, in that area the text is printed correctly.


Some idea? Thanks in advance

[REGSIS]

Re: bizhub 308e sometimes bad prints

Developing unit. Check!

Brand new? Machine was heavily tilted during transport!?

[copyman]

Re: bizhub 308e sometimes bad prints

Agree it's something with the developer. If it wasn't new I would be leaning toward consumables over life and pulling developer. Seen this a lot with "4" series.

[Bix]

Re: bizhub 308e sometimes bad prints

It has about 200 copies. I checked before I left and everything seems normal. Can it be that over time it disappears? In another 308e it happened to me that the fuser made a slight creak. After 500 copies, the slight creak has disappeared.


Strange these machines! They usually have improvements compared to normal models.

Thank you guys