Bizhub 361 CD203 error.

[Zesti]

Re: Bizhub 361 CD203 error.

Hi guys,
Couldn't check this back in days due to busyness.....I had the CD203 on BH501 and it got sorted out when I had a good working image of the CF card. I formatted the CD203 CF card in Windows PC and then restored the image on the formatted card... ALLL IS FINE SINCE THEN.

[mjunkaged]

Re: Bizhub 361 CD203 error.

I would try the CF-card recovery first. And then worry about the license issue is at all.
Don't think its you firmware.
Got no clue about firmware ver on these machines. I would have thrown it with a brick by now!

Yeah, these tough/weird issues keep me humble, but I wouldn't want EVERY call to be this tough! Lucky the customer was game to fix it.

[mjunkaged]

Re: Bizhub 361 CD203 error.fixed....license error...fixed...password still not.

I got all that fixed, but still no admin access (NOT default, or others, password reset entry screen still freezes) so could not set up scanning again. I have the original CF card for the OACB that's working in it, and was going to try putting it back in after erasing it/copying working image from other 361 machine's CF card, without formatting either one. Hope it works. Next visit, but not holding my breath.

[Synthohol]

Re: Bizhub 361 CD203 error.

can you access the copier via web?
sorry if you have said before, i didnt read every post.

[mjunkaged]

Re: Bizhub 361 CD203 error.

can you access the copier via web?
sorry if you have said before, i didnt read every post.

No, and I don't blame you this is getting to be a long thread!

[Synthohol]

Re: Bizhub 361 CD203 error.

what about soft reset?

[mjunkaged]

Re: Bizhub 361 CD203 error.

what about soft reset?

Soft reset of what? Nearly everything has been tried. Some older models had restart switches, this one doesn't have any to my knowledge.

[mjunkaged]

Re: Bizhub 361 CD203 and password loss FIXED!

So, I was on-site and tried installing the original NRB from the bad OACB, which didn't seem to work the first time I tried it (maybe it was a license error and I ASSUMED it was bad, or it laid in the box long enough to clear the error?). IT WORKS! TIME! DATE! PASSWORDS/RESETTABLE!
It's on the network now and scanning again. THANKS to all who gave suggestions and input.
I also brought the offending NRB(nonvol ram board) home and have discharged its capacitor, so it's ready to be installed in any OACB of that model family (361,421,501).