Re: Bizhub 361 CD203 error.
If I'd had one to sell, and my customer wanted to drop a few grand on it, that would have been sweet! I STILL would have wanted to fix the 361, it's just hitting 400k, a baby!!
-
-
Re: Bizhub 361 CD203 error.
A colic baby
WhateverComment
-
Follow-up. It is fixed.......but>>>>>>>>> ;>help?
SO:
I replaced developer, ran TCR, all good except, someone or something has changed web AND admin touch password to something we (me, customer, IT) don't know or want.
AND when I try to perform admin password clear, it appears to work, but then still can't enter the default 12345678 at touch panel.
I need to log in so I can set the time and date, and S ZERO C just ain't working any longer. This same machine has had passwords changed by NOBODY KNOWS WHO 3 times (over a few years) before it turned into a brick a couple weeks ago. I was always able to set both back to default before, and then re-enter what I wanted web pw to be.
Also, an interesting 'glitch' : when I go into the 'set admin password' screen after clearing it, the screen seems to allow me to enter 12345678, but then when I press end, cancel, or ANYTHING, screen appears frozen, and I have to reboot with main SW.
I also get orange blinking light under lift handle of ADF (status lights front of scanner), I've gotta look up what that means in SM again.
ALSO STRANGE: before it finishes booting to 'ready to copy' I get a screen saying license management error, and I can press close but it continues to say it under the 'ready to copy' .
I need clean new firmware, not sure but I think what I have may be old or corrupted or worse!
Good news is, it now prints, copies, scans like it did before, and I didn't need to restore any machine settings except paper size for LCT on the bottom off A4 and back to LT.
Comment
-
Re: Bizhub 361 CD203 error.
Had the exact same issue with a B601 in the past. Also after playing with the CF-card and firmware.
Not sure how i fixed but got it fixed. Think it happens if you just copy the CF-card data without using the CF-card recovery procedure.
Search the forum for "license management error" its a simple crack where you temperately change the serial number for a serial with a known reset code.WhateverComment
-
Re: Bizhub 361 CD203 error.
OK for clarity, if you have a problem with "License management error" in _ANY_ machine type, please follow procedure below.
1. Go to the service mode and change machine serial number to A0R6021006374 (must be uppercase)
2. Reboot the machine (turn off/on main power switch)
3. Go again to the service mode, then [STOP]->[9], then [License Management]->[Initialize]
4. Use following initialization code: 2VRA4-UGGA2-Z2H4K-7AVUH-F58SW-J2Z7U-QVKVK
5. Reboot machine again
6. One more time go to service mode and set back your original serial number
7. Last reboot, and you should have no error
ANY means:
Bizhub 421/501
Bizhub 601/751
Bizhub 223/283/363/423
Bizhub 552/652
Bizhub 224e/284e/364e
Bizhub C203/C253/C353
Bizhub C220/C280/C360
Bizhub C224/C284/C364 also 'e'
Bizhub C454/C554 also 'e'
and so on...WhateverComment
-
Re: Bizhub 361 CD203 error.
Credit should go to the original poster.
This has been reposted so many times know one knows...WhateverComment
-
Re: Bizhub 361 CD203 error.
Ok remeber now. If you cant use a cf-card from one machine in the next. That is when you get the password problem.
So when you changed the board and used the existing CF-card you created the problem just do the CF-card recovery again and it should be sorted.WhateverComment
-
Re: Bizhub 361 CD203 error.
I'm going to fix the license issue first, then what's the latest firmware version for 361, do you know? I'm not sure what my version is, as the executable had a different name. I have ver. 11, and not sure of the version I have that's latest because the executable is named '361US_m1g2100.exe, which when executed shows 'A0R7011m1g21000 (on mfp controller files)'. I got these from a different copytech poster for a previous machine's issue.
Comment
-
Re: Bizhub 361 CD203 error.
well please do keep us updated.. but frankly seeing the procedures posted by Allan.. you might have itI'm going to fix the license issue first, then what's the latest firmware version for 361, do you know? I'm not sure what my version is, as the executable had a different name. I have ver. 11, and not sure of the version I have that's latest because the executable is named '361US_m1g2100.exe, which when executed shows 'A0R7011m1g21000'. I got these from a different copytech poster for a previous machine's issue.Comment
-
Re: Bizhub 361 CD203 error.
To be clear, except for inserting a recovery CF card in place of the existing one, it should normally be flashed using the rear USB and a stick. What you're saying is it's a bad idea to take the cover off with FOUR SCREWS holding it on (two now) and just swap cards from other machines willy-nilly, even the same model #, or password corruption and other issues will occur, right?
If memory serves me, I tried first recovery CF, NG, then when I went back with parts I tried to swap over NRB + CF from existing (bootlooped) OACB and did not work/clear error code. ONLY after I 'borrowed the donor NRB (I think) that kicked it in the butt. Donor was 501, not 361.Comment
-
Re: Bizhub 361 CD203 error.
I would try the CF-card recovery first. And then worry about the license issue is at all.
Don't think its you firmware.
Got no clue about firmware ver on these machines. I would have thrown it with a brick by now!WhateverComment
Comment