One of my techs has a di3510 in the field with no response when turned on. I haven't been out to look at it yet, but here's the story I've gotten so far. He tells me the operation switch is on, in addition to the main switch. The only operational item is the main ventilation fan on the lower right in the rear. He's swapped out the power supply PWB-A and the control panel with no change in the symptom. I recommended checking the "memory" card on the side of the scanner and unplugging the fuser to check for an AC short. Anyone seen this before?
-
the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed. -
I have seen it, and dealt with it, but it is hard to remember what I did. Based on what you are saying has been done, it makes me think MFB3 and or rewrite the card.The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking -
I was thinking the card possibly needed rewriting too. I put all the components from the field machine in the machine they were pulled from and they all check out. I'll have to grab a card and rewrite it for tomorrow. Thanksthe savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
Comment