KM Bizhub pro 951 pausing during runs

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JVC
    Trusted Tech

    100+ Posts
    • Jun 2011
    • 151
    #1

    KM Bizhub pro 951 pausing during runs

    Hello

    We have just placed a rebuilt 951 at one of my customers and during large runs it seem to pause for up to 5 minutes at a time. Does anyone have any thoughts on why this may be happening? We placed two and the other one does not have this issue. Thank you in advance for any and all help.

    Joe
    Tags: advance, bizhub, runs
    • tech51
      Senior Tech

      500+ Posts
      • Jan 2009
      • 846
      #2
      Re: KM Bizhub pro 951 pausing during runs

      Try swapping the fusers over between the two machines and see if the fault transfers. You may have a faulty heater lamp.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22698
          #3
          Re: KM Bizhub pro 951 pausing during runs

          Do you get "Now correcting." message boxes? =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • DigiMan
              Trusted Tech

              Site Contributor
              250+ Posts
              • Jan 2013
              • 262
              #4
              Re: KM Bizhub pro 951 pausing during runs

              If memory serves there was a setting like "Fuser Pre-rotation" or something in the common settings which caused it to give large pauses between jobs to "avoid" damage in the fuser.
              I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.

                Comment

                • allan
                  RTFM!!

                  5,000+ Posts
                  • Apr 2010
                  • 5445
                  #5
                  Re: KM Bizhub pro 951 pausing during runs

                  At about 5Mil the fuser lamps gets too weak. They deteriorate and cause that trouble.
                  Replace the lamps.
                  Whatever

                    Comment

                    Previous template Next
                    Working...