Sc95-01 sc80-01 bizhub 1050 fixed

pudgi300

Trusted Tech

Join Date: Sep 2007

Posts: 189
#1

Sc95-01 sc80-01 bizhub 1050 fixed

03-21-2019, 02:54 PM

Just a little tip if someone has a BIZHUB 1050 with SC95-01 and SC80-02 when going to service mode. Machine would go to Ready To Copy but fail with J17-02 then throw SC95-01. After replacing prcb,oacb,accb and both adu boards. Seemed to be a dead end. What fixed the machine was replacing the ADU Connecting wire Assmy that had broken wires. p/n 56ua90210. Hope this helps someone.

SORRY SC80-01 should be SC80-02
Attached Files

DSC00464 (Small).JPG (72.6 KB, 19 views)

DSC00465 (Small).JPG (71.7 KB, 20 views)

Last edited by pudgi300; 03-21-2019, 03:39 PM.
Tags: adu, replacing, sc80-01, sc95-01
blackcat4866

Master Of The Obvious

Site Contributor
10,000+ Posts

Join Date: Jul 2007

Posts: 22703
#2

03-21-2019, 03:23 PM

Re: Sc95-01 sc80-01 bizhub 1050 fixed

Good catch! It take a lot of opening and closing of the drawer to wear through those wires. =^..^=

If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.

blackcat: Master Of The Obvious =^..^=
Comment

Comment