Just a silly question, but is it possible to utilize two different authentication units on a single bizhub MFP? Currently I am testing to see if I can get both an AU-204H(magstrip) and an AU-205H (HID) to work on the same C458. It would be beneficial to us cause in our case students have magstrip cards and staff have HID cards, and would be nice to let both groups use the same machine. So far my testing has been unfruitful, but I feel like its not that far-fetched of an idea. Can't seem to find any info on doing this. Any ideas/thoughts?
-
-
Re: [Various] multiple authentication units on one machine possible?
I think you'd need KM to write you a special firmware for the purpose. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: [Various] multiple authentication units on one machine possible?
Well, there are 2 LDD slots available..And Billing mode has 2 authentication device settings..I think you can run 201H and a 205H, or a mag stripe and a card reader at the same time..Although I have never tried to do this...Comment
Comment