Bizhub C250i " Black Toner Low" message

[allan]

Re: Bizhub C250i " Black Toner Low" message

Do you happen to know what the Eng SW are for the A4 pls ?

(Am away from my desk)

Check the manual under eng SW 6. Not clear what that does. All I know it does nothing if its already in showing the empty condition.

Can anyone enlighten me on what a toner bottle modification kit is on a C250i?

[allan]

Re: Bizhub C250i " Black Toner Low" message

https://www.copytechnet.com/forums/konica-minolta/175471-c3350i-c4050i-starter-toners-waisted.html?highlight=C4050i

[emujo2]

Re: Bizhub C250i " Black Toner Low" message

I don't see C4050i mentioned in this thread, it's about C250i and as I already noted those switches are found in bizhub C250i service manual....doesn't mean "by default" it is common with A4 color i models.
As a side note - maybe you can use Engine Switch No.6 for C4050i for similar purpose.

I see posts that have ZERO to do with the OP question, I see posts offering solutions long after the problem has been solved, I see posts that are hijacked and go off on a tangent, and I don't see you admonishing them for the posts, but I simply add that the A4s are not the same switch and "I'm barkking up the wrong tree"?? Wow...

[tsbservice]

Re: Bizhub C250i " Black Toner Low" message

I see posts that have ZERO to do with the OP question, I see posts offering solutions long after the problem has been solved, I see posts that are hijacked and go off on a tangent, and I don't see you admonishing them for the posts, but I simply add that the A4s are not the same switch and "I'm barkking up the wrong tree"?? Wow...

Who and where asked/commented about A4s in this thread exactly before you

Since where we compare enduser's lame posts with more than experienced service manager posts

You should known better... but good try your techs will be proud with you tomorrow.