7020 ribbon on main board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • repeatcopiers
    Senior Tech

    Site Contributor
    500+ Posts
    • Sep 2008
    • 591

    #1

    7020 ribbon on main board

    Does anyone have a secret to detaching the ribbon on the top of the main board. I've broken the plastic piece on the board before and now I'm gun shy.
  • kiwitechnician
    Technician

    50+ Posts
    • Dec 2008
    • 54

    #2
    Unusual :-) , no I am just joking. ,,Plastic fantastic,,

    The last possibility is glue it.

    Next time press slowly and together with two fingers on both sides.

    Comment

    • Luther
      Senior Tech

      500+ Posts
      • May 2006
      • 682

      #3
      Page 3-6 of the service manual ,disassemble/assembly section shows you how to remove it,hope this helps

      Comment

      • COPIER DAVE
        Technician
        • Jul 2006
        • 19

        #4
        I know this thread is old but I just found the trick to the 7020 ribbon cable. disconnect from the top under the glass not at the board. The connector there is just like the 7145 and works much better.

        Comment

        • repeatcopiers
          Senior Tech

          Site Contributor
          500+ Posts
          • Sep 2008
          • 591

          #5
          Good to know, I actually still have a few of those in the field. Thanks

          Comment

          Working...