C4050i with C - 5604

[Roger67]

Hello,

i have a brand new Bizhub 4050i who comes with a C - 5604 right after startup.

There is no discription in the Manual about that .

Any ideas ?

Thanks

Roger

[tsbservice]

Re: C4050i with C - 5604

Hello,

i have a brand new Bizhub 4050i who comes with a C - 5604 right after startup.

There is no discription in the Manual about that .

Any ideas ?

Thanks

Roger

Yes indeed I also can't find info about it.
Try to run full self-diagnostics and start from there.

[Roger67]

Re: C4050i with C - 5604

Yes indeed I also can't find info about it.
Try to run full self-diagnostics and start from there.

Hello,

it seem that the problem comes from the Mass storage Board.

Its not possible to install it or even deactivate it.

I just ordered a new one.

Roger

[tsbservice]

Re: C4050i with C - 5604

Try FW first.

[Roger67]

Re: C4050i with C - 5604

Hi Folks,

after spending a couple of Hours i still have the C 5604.

I changed

PWB
Storage Board
BASEBOARD

FW Version 79 is installed.


The Code comes right after startup even bevor any Initialisation has started.

Realy strange

Roger

[Bix]

Re: C4050i with C - 5604

It could be some pinched wiring if you replaced everything. Have you tried contacting KM?
What does self-diagnosis tell you?

[Roger67]

Re: C4050i with C - 5604

It could be some pinched wiring if you replaced everything. Have you tried contacting KM?
What does self-diagnosis tell you?

Hello,

no i dont have an Direct Contact to KM.
For execute a CALL i need to go to an other Dep in our Company.

Pinched Wiring is possible,but its even more difficult to find IT !

The Self-Diagnosis tells me that everything is OK ( ? )

Cheers

Roger

[Bix]

Re: C4050i with C - 5604

Another attemp
have you tried a trouble reset? Press the yellow button on the back of the display panel when you turn on the MFP.

[Roger67]

Re: C4050i with C - 5604

Another attemp
have you tried a trouble reset? Press the yellow button on the back of the display panel when you turn on the MFP.

Yes,i i have don this several times.

[kurtjo]

Re: C4050i with C - 5604

Hi.

Did you find a solution to the problem?

BR
Kurt

[and]

Re: C4050i with C - 5604

Hi.

Did you find a solution to the problem?

BR
Kurt

Error Code C-5604

C-5604 shows on a problem that is called "PH configuration error".

The problem is that the Print Head information that the Engine has and the PH information that is actually set, do not match.
Boards that belong to the system are not installed.
Please return the original boards back to the system

[kurtjo]

Re: C4050i with C - 5604

Error Code C-5604

C-5604 shows on a problem that is called "PH configuration error".

The problem is that the Print Head information that the Engine has and the PH information that is actually set, do not match.
Boards that belong to the system are not installed.
Please return the original boards back to the system