Dead FS-612

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DigiMan
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2013
    • 262

    [Misc] Dead FS-612

    Goodmorning gentlemen

    Yesterday a fellow tech went to remove some paper from a fs-612 attached to a c7000.Upon removing the papers he reconected the FS only to have it not been recognized by the main body.Went to see what went wrong and indeed no bent cables or pins on the plugs,if you connect the FS the main body wont recognize it at all.Didnt have much time to fiddle with it but before i go there again wanted to ask your opinions on what could be at fault here!

    Thanks in advance!
    I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.
  • Synthohol
    Certified Konica Expert

    Site Contributor
    5,000+ Posts
    • Mar 2016
    • 5457

    #2
    Re: Dead FS-612

    If it was accidentally disconnected while the machine was on it may have popped an ICP on the prcb.
    We know a thing or two because we've seen a thing or two.
    The medication helps though...

    Comment

    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7635

      #3
      Re: Dead FS-612

      Good man, this is great idea Synthohol!
      FS612_ICP List.pdf
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      • Synthohol
        Certified Konica Expert

        Site Contributor
        5,000+ Posts
        • Mar 2016
        • 5457

        #4
        Re: Dead FS-612

        here is the machine ICP lists
        Attached Files
        We know a thing or two because we've seen a thing or two.
        The medication helps though...

        Comment

        Working...