[Misc] Reset emmc C308 konica

[pit79000]

hello, I would like to reset a bizhub c308 emmc for reconditioning to new standard with the choice of meters for provisioning.can help me tell me how to do it and if you have a walkthrough.I had found for range 4 and I would like to do it for range 8.it's urgent thank you all for the help.

[JDR]

Re: Reset emmc C308 konica

you mean you want to reset counters ? cause you dont need to reset eemc for reconditionning ...

[pit79000]

Re: Reset emmc C308 konica

Hello,
I want to reset the totalizer counters to zero because my copiers are all done like that for setting up with customers (provision).
This allows me to start my maintenance by setting everything to zero as if the copier was new.
thank you

[tsbservice]

Re: Reset emmc C308 konica

...
This allows me to start my maintenance by setting everything to zero as if the copier was new.

Nobody here would guide you doing that. If any they will ask for money.
If - doesn't mean new copier. You can easily reset parts counters but that doesn't mean they are new.

[Phil B.]

Re: Reset emmc C308 konica

Hello,
I want to reset the totalizer counters to zero because my copiers are all done like that for setting up with customers (provision).
This allows me to start my maintenance by setting everything to zero as if the copier was new.
thank you

are you selling them as new?

not sure about France.. but here in the USA .. if you don not tell the customer that you have zero'd out the counters you could be in legal trouble..

and frankly most here will find a problem with your request. shady deals gets techs in trouble.

[Phil B.]

Re: Reset emmc C308 konica

Nobody here would guide you doing that. If any they will ask for money.
If - doesn't mean new copier. You can easily reset parts counters but that doesn't mean they are new.

bet he doesn't put all NEW Genuine Parts/supplies in...

we get too many of these types here.

[tsbservice]

Re: Reset emmc C308 konica

...

we get too many of these types here.

Sadly, you're right Brother. We need more French techs here but somehow there are none. I'm not surprised though.

[Bix]

Re: Reset emmc C308 konica

In europe it is illegal to pass off a refurbished printer like new and prosecutable in court

[Synthohol]

Re: Reset emmc C308 konica

Gee if we only had mods to close threads like this.....

[Phil B.]

Re: Reset emmc C308 konica

In europe it is illegal to pass off a refurbished printer like new and prosecutable in court

Bix,

thanks for clearing that up for me.. I THOUGHT that would be the case but wasn't sure about it!

Thanks Again Brother!

[srvctec]

Re: Reset emmc C308 konica

Oh look, now he has a red card! Bugs the crap out of me when someone is being dishonest.

[avecosat]

Re: Reset emmc C308 konica

There are many unofficial people offering refurbished machines with "pay per copy"

[Copier repairman]

Re: Reset emmc C308 konica

I'm sorry I can't help you.
now me has a red card!
!!!
Hint) 1.Apply for a new SSD board at Konica Minolta.
2.Reset the firmware reset tool for Bizhub C308.
3.Format the used SSD board using a format device.

[pit79000]

Re: Reset emmc C308 konica

Damn it's a shame can you tell me how I can recover and where to find this donkey face that can allow me to reset and initialize EMMC Could you explain to me in more detail how to do it because I am not a computer scientist or programmer programmer.
All I know apparently in Spain it gives me the totalizer counters of the machine to the number of copies that they want by connecting a box to the machine and we then the time from the PC but I do not know more.
thanks