Hi, I have a Bizhub C3110.
it is an old machine but has only 1500 prints. I hadn't turned it on for several months and now the printer prints me strangely. When it passes through the fuser I hear a crumpling noise. When the print comes out, it is slightly crooked. Also in one part of the sheet there are some folds flattened by the fuser. The paper in the tray is held tight by the adjustment rails. Something tells me wet paper.
it is an old machine but has only 1500 prints. I hadn't turned it on for several months and now the printer prints me strangely. When it passes through the fuser I hear a crumpling noise. When the print comes out, it is slightly crooked. Also in one part of the sheet there are some folds flattened by the fuser. The paper in the tray is held tight by the adjustment rails. Something tells me wet paper.