If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am fitting the pink A64 clippy rollers to everything that can take them as I dont want to carry a million different roller types.
Unfortunately my OCD doesnt allow me to fit them to the 958 series with their integrated white double clip so I still have to carry the old A00J red and A5C tracktor wheel, but in smaller quantities than I used to.
The pink A64 rollers actually turn red when you swap them onto the black core and the red a00j rollers turn pink when swapped onto the grey core so I beleive the roller material is actually the same.
i just remove that white clip. not sure why KM ever thought it was needed not like the C clips ever failed. and if they are pushing the a64 design with built in clips then why make something that makes them redundant
Comment