Hi There
I Have problem
after replace developer bizhub pro 1050e i have halfpage gray background from top side
I use oryginal developer 56UA30601 - on box have information about dip-sw 7-0:1
so i do that
i reset also counter developer
and go to Drum Peculiarity adjustment mode do
auto drum potential adjustment (completed)
auto maximum density adjustment (completed)
auto dot diameter adjustment (here have error 1)
LD offset adjustment
Auto gamma adjustment
Cartridge set mode
them go to copy meny put 10 shets
and nothiong still have half gray pages
please help
I Have problem
after replace developer bizhub pro 1050e i have halfpage gray background from top side
I use oryginal developer 56UA30601 - on box have information about dip-sw 7-0:1
so i do that
i reset also counter developer
and go to Drum Peculiarity adjustment mode do
auto drum potential adjustment (completed)
auto maximum density adjustment (completed)
auto dot diameter adjustment (here have error 1)
LD offset adjustment
Auto gamma adjustment
Cartridge set mode
them go to copy meny put 10 shets
and nothiong still have half gray pages
please help