If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello guys.. I have this bizhub C353 not botting so i changed the 512Ram on the PRCB.so after changing it, the machine bot successfully but i now receive this message C-C163..what else can i do pls
Hello guys.. I have this bizhub C353 not botting so i changed the 512Ram on the PRCB.so after changing it, the machine bot successfully but i now receive this message C-C163..what else can i do pls
Do you have the service manual? Wrong model firmware error during initial engine diagnosis.
Defective EEPROM or PRCB.
Comment