Fuser driller damage

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4724

    #16
    Re: Fuser driller damage

    I've rebuilt many of these fusers with great success! Both the fuser belt & roller are available aftermarket. I get them from Copylite products.

    These are a lot easier to rebuild than the C253, etc.

    Comment

    • AL parts
      Technician

      Site Contributor
      50+ Posts
      • Jun 2019
      • 61

      #17
      Re: Fuser driller damage

      Originally posted by tsbservice
      Agreed although I didn't rebuild them. Link to good how-to video:
      Thank you for posting our products.
      www.gzanling.com

      Comment

      • positiveg
        Trusted Tech

        250+ Posts
        • Jun 2018
        • 299

        #18
        Re: Fuser driller damage

        Wow this is pretty cool.
        I actually saw the video whilst looking on info how to just remove the paper.
        Well I got the paper out and was able to out the fuser back in the machine just to check how prints will look. Yeah marks are there seems some customers just needed a print and where the marks didn't show up. I've already ordered the other fuser. Praying FedEx comes in today with it.
        If not will be tomorrow.

        Such a small world I went to the site did a search but was unable to find the fuser spare parts.

        Sent from my SM-G955F using Tapatalk

        Comment

        Working...