White spots

[wynter17]

Re: White spots

So i spent a lot of time today figuring out what is the problem,the black iu is not getting enough toner.

Sent from my SM-G980F using Tapatalk

[allan]

Re: White spots

So i spent a lot of time today figuring out what is the problem,the black iu is not getting enough toner.

Sent from my SM-G980F using Tapatalk

Mmm...
Toner you say?
How did you go about fixing it?

[wynter17]

Re: White spots

Mmm...
Toner you say?
How did you go about fixing it?

Sorry for my late response,i was quite busy,yes,i tried adding manually some toner and it is a lot better now,sometimes i get the message "install toner cartridge k" or " set toner cartridge k",tried with a new toner but same problem,i checked everything related to the toner but nothing is broken.
So i think the problem is with the toner sub hopper assy,looks like the toner is not getting through,will check tomorrow.

Sent from my SM-G980F using Tapatalk

[allan]

Re: White spots

Sorry for my late response,i was quite busy,yes,i tried adding manually some toner and it is a lot better now,sometimes i get the message "install toner cartridge k" or " set toner cartridge k",tried with a new toner but same problem,i checked everything related to the toner but nothing is broken.
So i think the problem is with the toner sub hopper assy,looks like the toner is not getting through,will check tomorrow.

Sent from my SM-G980F using Tapatalk

My mind just can't figure out why it would make the white spots when its under toned.

[Bix]

Re: White spots

I had a similar problem on a bizhub 658e. In my case it was a K drum. A piece of internal plastic has blown.