konica minolta bizhub press c7000 showing error c0103

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Naveed Shahid
    Trusted Tech
    Site Contributor
    100+ Posts
    • May 2008
    • 162

    #1

    [Error Code] konica minolta bizhub press c7000 showing error c0103

    Hello Every One,

    konica minolta bizhub press c7000 showing error c0103 i changed paper feed motor but problem still remain same

    any advice plz

    Thanks
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22999

    #2
    Re: konica minolta bizhub press c7000 showing error c0103

    Did you clear the error: zero out DIPSW 35-0, 35-1, 35-2, 35-3, 35-4, 35-5?

    Motor M1 is driven by the paper feed board (PFDB) and front door switches (SW1 & PS23).
    If there are ICPs on the C7000, there are no details in the manual.
    When I looked at the C1070 manual, there is no ICP specific to the paper feed motor M1.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7976

      #3
      Re: konica minolta bizhub press c7000 showing error c0103

      Dead FS-612

      ICP list provided by Synthohol.
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      Working...