Colour Density Issue Konica Minolta 1060L

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • leecot
    Junior Member
    • Feb 2021
    • 1
    #1

    Colour Density Issue Konica Minolta 1060L

    Hi All,

    Looking for some help. We have a problem which we believe is a colour density problem - image attached.

    There is a 1 - 2 inch band of low density along the nearside long edge which has my tech guys a little stumped. If affects all colours, although black does seem to more affected than the others.
    We've tried new drums, new developer, new coronas, new transfer belt and rollers, swapped the fuser and transfer unit from our second 1060 without any success. We've done the colour density via ColorCare and various other density options on the press.

    Any help or advise would be greatly appreciated. IMG_6391.jpg
    Tags: colour, density, transfer, unit
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22698
      #2
      Re: Colour Density Issue Konica Minolta 1060L

      Is there a repeating interval? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • lartis.aineias
          Technician

          50+ Posts
          • Dec 2020
          • 78
          #3
          Re: Colour Density Issue Konica Minolta 1060L

          Originally posted by leecot
          Hi All,

          Looking for some help. We have a problem which we believe is a colour density problem - image attached.

          There is a 1 - 2 inch band of low density along the nearside long edge which has my tech guys a little stumped. If affects all colours, although black does seem to more affected than the others.
          We've tried new drums, new developer, new coronas, new transfer belt and rollers, swapped the fuser and transfer unit from our second 1060 without any success. We've done the colour density via ColorCare and various other density options on the press.

          Any help or advise would be greatly appreciated. [ATTACH=CONFIG]48569[/ATTACH]
          Go to the R-9 page on service manual to see the procedure!

          Στάλθηκε από το SM-G975F μου χρησιμοποιώντας Tapatalk

            Comment

            Previous template Next
            Working...