BizHub 363 C-C164 error

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • tsbservice
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by darichmiester
    Not to worry... There is a lot of good info here. I really don't mind contributing for that.

    You have a nice weekend and again, thanks for your advice and knowledge.
    I'm going to upload FW for you but indeed board should be right for the model.
    Keep this attitude and don't be afraid to ask for help. Good luck.

    Leave a comment:


  • darichmiester
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by emujo2
    you should ask for a contribution refund...and BTW what does that get you? I noticed the new pop up ads all over the place, is the site charging for ads and taking contributions and allowing private individuals to post "click here for pirated firmware/manuals"

    Not to worry... There is a lot of good info here. I really don't mind contributing for that.

    You have a nice weekend and again, thanks for your advice and knowledge.

    Leave a comment:


  • emujo2
    replied
    Re: BizHub 363 C-C164 error

    you should ask for a contribution refund...and BTW what does that get you? I noticed the new pop up ads all over the place, is the site charging for ads and taking contributions and allowing private individuals to post "click here for pirated firmware/manuals"

    Leave a comment:


  • darichmiester
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by emujo2
    The 363/423 uses A1UDH0200C
    The 223/283 uses A1UDH02108

    They are not interchangeable..No firmware is going to help with this..E
    Well... you may be right... I pulled a A1UDH021 and put in a A1UDH020. I didn't even notice it till you mentioned it.
    I just took for granted that it was for a 363/423 as per the vendor(seller). If this is true then, my mistake.

    I guess I will use this 363 as a parts machine to T/S the other 4 we have on our network. Bummer...

    Thanks for the heads up sir!

    Leave a comment:


  • emujo2
    replied
    Re: BizHub 363 C-C164 error

    The 363/423 uses A1UDH0200C
    The 223/283 uses A1UDH02108

    They are not interchangeable..No firmware is going to help with this..E

    Leave a comment:


  • tulintron
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by darichmiester
    Thank you sir... I was a contributor before I asked a question. I didn't want to be a leech.

    I find this site quite useful when Googling problems I have with some of our network printers.

    I really didn't think I would cause such a stir. If some one would be kind enough to help me then GREAT..

    If not, then that's OK too.
    Forget the fight and focus on your problem. Synth gave you the way. C164 refers to the fw incompatibility between boards. Okay, it was the board that installed it. Update according to board exchange procedure and tell us the result

    Leave a comment:


  • darichmiester
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by tsbservice
    Phil looks like he is already a contributor.
    Thank you sir... I was a contributor before I asked a question. I didn't want to be a leech.

    I find this site quite useful when Googling problems I have with some of our network printers.

    I really didn't think I would cause such a stir. If some one would be kind enough to help me then GREAT..

    If not, then that's OK too.

    Leave a comment:


  • copyman
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by tsbservice
    Sounds reasonable but I have a question for you. How did this site rises money to be up and running nonstop for techs like us? There are always two sides of the coin.
    Sure it looks frustrating as hell to me when lack of moderation hits tech forums but it pays hundred times when I get or offer help from/to other members.
    Please let others decide what way they have here and stay in your course there's nothing wrong both roads .
    Don't think it takes much work or money to keep a website running. It basically runs itself. With that said I still make a contribution every year. Could look at it that I help way more then I ask for help but I still contribute.

    Leave a comment:


  • Synthohol
    replied
    Re: BizHub 363 C-C164 error

    The machine type has to be changed for the new machine
    Boot to a firmware stick and change the machine and type.
    GQ7-D1 firmware might help but i assume you didnt swap the SSDs right?
    Last edited by Synthohol; 04-21-2021, 10:59 PM.

    Leave a comment:


  • Phil B.
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by tsbservice
    Sounds reasonable but I have a question for you. How did this site rises money to be up and running nonstop for techs like us? There are always two sides of the coin.
    Sure it looks frustrating as hell to me when lack of moderation hits tech forums but it pays hundred times when I get or offer help from/to other members.
    Please let others decide what way they have here and stay in your course there's nothing wrong both roads .
    +1

    Leave a comment:


  • tsbservice
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by copyman
    Not sure why some techs here keep telling people to contribute to this website. Or dangle firmware in front of them to get them to contribute. I use to do this same thing but after several times contacting the ONE and ONLY moderator and NEVER getting a reply that was it. Game over! Now if I can help someone I do it for free and will never mention contribute.
    Sounds reasonable but I have a question for you. How did this site rises money to be up and running nonstop for techs like us? There are always two sides of the coin.
    Sure it looks frustrating as hell to me when lack of moderation hits tech forums but it pays hundred times when I get or offer help from/to other members.
    Please let others decide what way they have here and stay in your course there's nothing wrong both roads .

    Leave a comment:


  • Phil B.
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by copyman
    Not sure why some techs here keep telling people to contribute to this website. Or dangle firmware in front of them to get them to contribute. I use to do this same thing but after several times contacting the ONE and ONLY moderator and NEVER getting a reply that was it. Game over! Now if I can help someone I do it for free and will never mention contribute.
    there are no moderators... only 1 admin... he has a family and a full time job he doesn't come in everyday... sometimes not even every week..

    How did you contact Aneurysm?

    Leave a comment:


  • copyman
    replied
    Re: BizHub 363 C-C164 error

    Not sure why some techs here keep telling people to contribute to this website. Or dangle firmware in front of them to get them to contribute. I use to do this same thing but after several times contacting the ONE and ONLY moderator and NEVER getting a reply that was it. Game over! Now if I can help someone I do it for free and will never mention contribute.

    Leave a comment:


  • tsbservice
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by Phil B.
    he wasn't when i suggested it brother.
    Understand. I will look through my files tomorrow.

    Leave a comment:


  • Phil B.
    replied
    Re: BizHub 363 C-C164 error

    Originally posted by tsbservice
    Phil looks like he is already a contributor.
    he wasn't when i suggested it brother.

    Leave a comment:

Working...