Konica Biz Hub 600 toner bottle support tray needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tonerjockey
    Senior Tech

    500+ Posts
    • Apr 2014
    • 567

    #1

    Konica Biz Hub 600 toner bottle support tray needed

    Hello, has something changed with the site layout in the last several days? its totally different at least for me on my end.

    i posted a parts inquiry last week in the parts section, and its gone now.

    I am looking for a couple parts from the Konica Biz Hub 600 toner bottle drawer.
    Either the drawer assembly which is the part with the blue release lever or the inner tray and another part.
    (Inner tray), cartridge pressing part 57AA 3230 0
    (Lever) locking part C 56AA3275 1
    (Toner bottle tray drawer) toner supply unit, 3 different part numbers listed for destination variations
    57A-320 0 57AE-320 0 or 57AF-320 0

    i used to have a few Konica techs here in the past that had some old parts and could make a little extra cash selling them.
    i am hoping to keep this customer going for a while longer if possible.

    thank you very much.
  • Synthohol
    Certified Konica Expert

    Site Contributor
    5,000+ Posts
    • Mar 2016
    • 5857

    #2
    you might have better luck here https://www.copytechnet.com/forum/te...the-parts-room
    We know a thing or two because we've seen a thing or two.
    The medication helps though...

    Comment

    Working...