C-5104 error on C1085

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • adeyemi
    Trusted Tech

    250+ Posts
    • Apr 2010
    • 378
    #1

    [Error Code] C-5104 error on C1085

    This C1085 comes up with this C-5104 fault as it boots. The PRCB was replaced as seen from the manual, but this never resolved it. Anyone with some experience with this fault? Thanks
    Dgtal
    Tags: None
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5737
      #2
      after replacing the board you ran full firmware on the machine so everything matches?
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • adeyemi
          Trusted Tech

          250+ Posts
          • Apr 2010
          • 378
          #3
          Yea Synthohol, actually did a firmware upgrade.
          Dgtal

            Comment

            • adeyemi
              Trusted Tech

              250+ Posts
              • Apr 2010
              • 378
              #4
              Still not gotten a solution to this. Any help from out there will be greatly appreciated.
              Dgtal

                Comment

                Previous template Next
                Working...