Baby Dinosaur, Lamp error

[Hansoon]

This little dinosaur BH-240f, with the customer for at least 15 years, shows "Lamp Error". The customer, a kind old lady, begs me to take a look at her machine because she got so much used to it. Before I go there to clean the lamp and under side of the glass platen as well as the white strip, I would like to know if any of you guys had this before and if before mentioned cleaning would solve the problem or do you advise else?

Hans

[scanmc]

Think it was the same as the Muratec MFX2550/2570 unit. I would clean the slit glass etc & run a back ground level check. If I remember it was Hold down the mode button until the machine beeps twice then push *09 to enter. It should be listed. Also, check the time on the machine.

[Toxic]

Clean lamp and mirrors and update firmware to 240f_EUR_E2A0A0
Back in time i had many of this model with lamp error problem and this solving it.

[Hansoon]

Thanks!

Anyone having for me please firmware 240f_EUR_E2A0A0?

Hans

[Toxic]

Thanks!

Anyone having for me please firmware 240f_EUR_E2A0A0?

Hans

PM sent

[Hansoon]

THANKS!!

Hans

[elmaligno]

Read this first