Konica Minolta bizhub C658 (marks on page)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zunamiwave
    Technician
    • Nov 2023
    • 22
    #1

    Konica Minolta bizhub C658 (marks on page)

    Troubleshooting Konica Minolta bizhub C658 marks on side of printed page. Scanned in sample offset/upside down to show pointed out marks. Marks when printed are right on the edge of printed page. Any suggestions greatly appreciated.
    Attached Files
    Tags: None
    • SAR
      Trusted Tech

      100+ Posts
      • Jul 2009
      • 205
      #2
      Those 8 series machines get those dash marks from the fuser having wear, or possibly a drum based on the spacing of the marks.

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4764
          #3
          Looks like black drum

            Comment

            • zunamiwave
              Technician
              • Nov 2023
              • 22
              #4
              The mylar wiping blade above the transfer belt was misaligned and very dirty. Cleaned and adjusted mylar wiping blade to remedy. Thank you everyone for your help and suggestions.

                Comment

                • copyman
                  Owner / Technician

                  Site Contributor
                  2,500+ Posts
                  • Sep 2005
                  • 4764
                  #5
                  Originally posted by zunamiwave
                  The mylar wiping blade above the transfer belt was misaligned and very dirty. Cleaned and adjusted mylar wiping blade to remedy. Thank you everyone for your help and suggestions.
                  Glad to hear it's fixed but not sure how a wiping blade could make evenly spaced marks like that. Very interesting.
                    👍 3

                    Comment

                    Previous template Next
                    Working...