BH-C-280, Transfer belt?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3390
    #1

    BH-C-280, Transfer belt?

    This BH-C-280 is having a strange effect which I cannot explain directly, but my guts are telling me perhaps Transfer Belt. The void is repeating every 96 mm. The front edge of the void is sharp on the feeding side but fuzzy on the trailing side. The void is not over the whole width of the paper but asymmetric and concentrated a little more to the front of the machine. Its doing it on all colors but most visible with magenta. See attachment.

    All developing units and all drums are over life.
    Transfer Belt has 30 K
    Transfer Roller 120 K

    Any ideas please?

    Hans
    Attached Files
    Last edited by Hansoon; 10-16-2024, 07:08 AM.
    “Sent from my Intel 80286 using MS-DOS 2.0”

    Tags: None
    • femaster
      Service Manager

      1,000+ Posts
      • May 2011
      • 1514
      #2
      Your attachment seems to be missing.
      A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
      My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3390
          #3
          Now it's there. It has been removed, because my post was initially flagged since I was considered a bad, bad, spammer

          Hans
          “Sent from my Intel 80286 using MS-DOS 2.0”

            😂 1

            Comment

            Previous template Next
            Working...