anyone have a C2070 with Sd513 and a IC313....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • methogod
    Senior Tech

    Site Contributor
    500+ Posts
    • Dec 2008
    • 919
    #1

    anyone have a C2070 with Sd513 and a IC313....

    need to know if you can run 13x19 booklet with the 4 staple option selected... so i can run 2 up on 13x19

    IC313 is running 1.2sp1 - doing the updates now to see if anything changes, just having more issues. Now installing SP2.

    looks like it will allow me to do it on 11x17, but not 12x18 or 13x19

    doesn't make any sense.
    Tags: 13x19, ic313, installing, run, sp2
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23002
      #2
      Re: anyone have a C2070 with Sd513 and a IC313....

      I'm gonna say yes ...

      if you look at note *4 on pg C-47, size 13" x 19" = Super A3 will half fold when printed on C1070, C1070P, C71hc, C1060, C2070, C2070P, C2060 only. I don't know about the 4-staple ... you might have to add a couple staples after the fact.

      Perhaps there's a firmware update to add that functionality. Will it allow you to do the job setup? Are you within the page count and weight restrictions? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...