Re: bizhub c330i - card reader issue
you used this link ,this driver used for KMc300i/360i Google Drive: Sign-in
bizhub c330i - card reader issue
Collapse
X
-
Re: bizhub c330i - card reader issue
Search for Elatec TWN4 in Knova, I think there are drivers available.Leave a comment:
-
Re: bizhub c330i - card reader issue
You can attach it directly, without a loadable driver, and use it as a "keyboard". One drawback of using this configuration, you lose the card self-association with existing user accounts.Leave a comment:
-
Re: bizhub c330i - card reader issue
Thank you for your help. Thats pointed me in the direction i need, many thanks.Leave a comment:
-
Re: bizhub c330i - card reader issue
KM offers drivers for the AU205H and Mifare..you would not use a papercut reader directly on a km device, however, the fast release card readers can be used to authenticate and perform follow me printing at devices that do not have the ability to log in from the large LCD screen. It's possible you might be able to use the LDD tool and create a driver using the papercut hardware IDs. ELeave a comment:
-
bizhub c330i - card reader issue
Hi all. Was wondering if anybody knew which driver to use for this card reader?
Printer is a bizhub c300i, i have been on Knova and tried all the loadable drivers i can find there, they either dont load on, or they do load on
but when i reboot, it says unable to connect with authentication device.
I have swapped card reader for one i know is definetly working and get same issue, so its not card reader, customer can login to Papercut embedded using user
name and pass, just not card reader
Thanks in advance all
IMG_1138-min-min.JPGIMG_1136-min.JPG
Leave a comment: