Konica c284e firmware on a Develop Ineo+ 284e

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jonbonse
    Senior Tech

    Site Contributor
    500+ Posts
    • Jun 2009
    • 730

    #1

    Konica c284e firmware on a Develop Ineo+ 284e

    Hi all

    Just wanted to ask if the Konica firmware can be used on Develop equivalent?

    I need to enable airprint. The current firmware is A5C10YO-3000-GHO-44 and management version 7...
    Last edited by jonbonse; 12-03-2021, 05:16 PM.
  • D Colour
    Trusted Tech

    Site Contributor
    100+ Posts
    • Oct 2008
    • 213

    #2
    Re: Konica c284e firmware on a Develop Ineo+ 284e

    On this range we have used the firmware we download from Olivetti on Konica and Develop models without issue, so I am assuming they are identical.

    MF282 Plus = C284e = +284e
    Everything that has a beginning, has an end.....

    Comment

    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8100

      #3
      Re: Konica c284e firmware on a Develop Ineo+ 284e

      Originally posted by jonbonse
      Hi all

      Just wanted to ask if the Konica firmware can be used on Develop equivalent?

      I need to enable airprint. The current firmware is A5C10YO-3000-GHO-44 and management version 7...
      Yes, I have been upgrading Develop & Olivetti with KM firmware without any issues.


      After upgrading set SW25 to HEX 60 to enable AirPrint. (function version 7)

      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk

      Comment

      Working...